If you need to cut branches or limbs that are out of reach from the ground, you need to use a pole saw. battery pole saw is a good option for saving resources, and while learning how to use battery pole saw safely is easy, the caution required is still important.

Before you can learn how to use a battery pole saw, you first need to know about it.

1. What do you use battery pole saw for?

In a nutshell, a battery pole saw is a power-operated saw mounted on the end of a pole and is used for two main tasks.

(1) Pruning branches that are too high to reach without a ladder.

(2) Reaching out to trim trees or shrubs that would otherwise be inaccessible.

2. How far can the battery pole saw reach?

The length of a battery pole saw varies by make and model, but most pole saws can extend 8 to 15 feet. Add the pole extension length to your own height plus the arm length and you have the potential cutting range.

3. How thick can a battery pole saw cut?

A general rule of thumb for safe cutting with a battery pole saw is to use a blade that is at least two inches longer than the diameter of the thickest branch you need to cut. This also applies to using a battery pole saw. most pole saw blades are 8 to 12 inches long, but if you are staring at a limb that is thicker than 8 inches, we recommend that you seek professional help.

Steps to use battery pole saw safely.

1. Read the user's manual.

Like it or not, you can't learn how to use a battery pole saw safely without reading the owner's manual. this is the only way to make sure you are familiar with the safety features and specifications of your particular make and model.

2. Wear the proper equipment.

Using a battery pole saw requires the same protective equipment as using a standard chainsaw: eye protection, hearing protection, work gloves, sturdy boots, long pants and sleeves (fitted), and a safety helmet.

3. Inspect and clear the area.

Make sure your work area is well lit and dry. Do not operate the battery pole saw in wet conditions and always work in full daylight to see what you are doing. Also, maintain a safe perimeter around your work area, free of people, pets and property that could be damaged. Consider the entire area where branches may land, and if you are in a public area where bystanders may walk too close, rope them off. Also check for tripping hazards so you can walk around safely.

4. Plan your cutting.

Before you make your first cut, visually assess the job at hand and make a plan. Look at the big picture; consider all the branches to be removed, and then figure out how you need to safely access those top branches. Most likely, you will need to remove the lower branches first to make room for the higher branches to make a clear cut.

5. Position yourself.

It is important to say that you should not stand directly under your cut. The proper place to safely use the battery pole saw is to the side of the branch, so it doesn't fall on you when it falls out of the tree. You want to place the pole saw at chest height and at a slight angle to the branch. When you determine the position is the best time to adjust the length of the pole. Refer to your owner's manual for specific instructions, then adjust the pole so that the blade reaches the target branch when you hold the battery pole saw at chest height.

6. Place the blade server.

Hold the battery pole saw with both hands and aim the saw at the branch you plan to cut. Make sure you are comfortable and can control the weight of the equipment. With your feet firmly in place, move the blade so that its weight rests on the branch.

7. Start cutting.

Start with slow, controlled strokes. When cutting thicker branches, rather than starting at full speed (which can cause slippage and make the job more difficult and dangerous), make a groove in the wood by tapping or gently depressing the throttle. The groove can then be used as a guide for the rest of the cut. When making the initial groove, be aware that the blade may slide (and usually will if the branch is tilted). If this happens, stop cutting and reposition the blade before continuing.

8. Complete the cut.

When you have created a groove and your saw is safe to use as a guide, you can increase the speed to complete the cut. As the cut deepens, pay attention to the branch and how it reacts to the battery pole saw. Even if you veer to one side, branches can break and fall in unpredictable ways, especially if the wood is under tension. Fine limbs do not require a slow-cutting notch, but do require the same awareness.

9. Re-clean the area.

After a branch or limb has fallen, it is wise to remove it from the area so that it does not pose a tripping hazard as you continue to work. This is also a good time to check on any person or pet again.

10. Repeat steps 4-9.

This is the knowledge about how to use battery pole saw safely, if you need more detailed information, welcome to contact us!